CASTROL Magnatec C3 5w40 4L

Description

CASTROL Magnatec C3 5w40 4L
Up to 75% engine parts wear occurs during start-up or warm-up. When the engine is switched off, ordinary engine oil drains into the engine crankcase at the bottom, leaving the most important parts of the engine unprotected. Castrol Magnatec molecules are attracted like a magnet to all parts of the engine, forming what is known as an 'oil film' that gives the engine protection right from start-up.
Castrol recommends Castrol Magnatec 5w40 C3 for use in engines that meet GM/Opel Dexos2, GM LL-A-025 or GM-B-025 specifications.
Castrol Magnatec 5W-40 C3 provides maximum protection for the new generation of engines with exhaust gas aftertreatment, i.e. with DPFs and three-stage catalytic converters.
Castrol Magnatec 5W-30 C3 is designed for modern petrol and diesel engines with turbines, intercoolers, direct fuel injection systems, common rail engines with catalytic converters and diesel engines with diesel particulate filters (DPF).
Castrol Magnatec 5W-30 C3 is formulated with new Intelligent Molecules technology that provides active and long-lasting protection and increases engine performance. The unique Intelligent Molecules microparticles adhere to metal surfaces to form an ultra-strong oil film that protects the friction pores from abrasion.
Castrol EDGE - the best oil For anyone looking for the best, highest quality oil. The best range of car oils available. The best Castrol products, built on a century of experience. Meets the specifications of BMW, VW, Audi, Opel; recommended by Aston Martin. Castrol's unrivalled commitment to the needs of motorists. "The Castrol EDGE range is built with state-of-the-art technology and tailored for the most demanding drivers who simply can't live without their cars.
Description
Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol Magnatec's intelligent molecules don't, they cling to the engine like a magnet providing an extra layer of protection ready to protect from the moment you turn the key.
Castrol Magnatec's molecules are always there, always ready, dramatically reducing* engine wear when the most damage happens; as your car warms up.
Now with ultra-refined molecules, for protection you can see, hear and feel.
Castrol Magnatec. Instant protection from the moment you turn the key.
* As tested against the industry Sequence IVA wear test.
Product application
Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A3/B3, A3/B4, C3, API SM/CF or earlier specification 5W-40 lubricant.
Castrol Magnatec 5W-40 C3 is approved for use in cars from a wide variety of manufacturers, please refer to specifications and your vehicle handbook.
Product features and benefits
Castrol Magnatec's Intelligent Molecules:

Cling to critical engine parts when the oil drains down.
Cling to your engine forming an extra layer that protects during start up and beyond.
Bond to metal surfaces to make engine parts more resistant to wear.
Are combined with synthetic technology to provide increased protection in high and low temperature applications.
Provide continuous protection for all driving conditions, styles and temperatures.

Castrol Magnatec 5W-40 C3 also delivers superior performance under extreme cold start up conditions.
Quality level

CASTROL Magnatec C3 5w40:
 

ACEA
A3/B3, A3/B4, C3

API
SN/CF

BMW
Longlife-04

MB-Approval
229.31/ 226.5

VW
502 00/ 505 00

FIAT
9.55535-S2

RENAULT
RN0700 RN0710

GM
DEXOS2, LL-A-025, LL-B-025

Technical characteristics

CASTROL Magnatec C3 5w40
Units of measurement
SAE 5W40

Relative density at 15°C
g/cm3
0.85

Kinematic viscosity at 100°C
cSt
13.2

Kinematic viscosity at 40°C
cSt
80

Kinematic viscosity at -30°C
cP
6100

Viscosity index
–
164

Temperature of the plenum
°C
200

Stagnation temperature
°C
-48

Sulphated yield
% in weight
0.7