Alyva TOTAL Quartz INEO First 0W30 1L

Description

TOTAL Quartz INEO First 0W30
A premium synthetic-based oil provides maximum protection against wear for the engine and its components. Low SAPS (low ash content) ensures low soot and ash content in engine exhaust gases. The use of this oil reduces fuel consumption. This oil maintains excellent engine performance even under the most severe operating conditions. The oil can be used for the latest e-HDI engines as well as for hybrid engines where the manufacturers specify the use of a new generation oil. Recommended for new generation PEUGEOT, CITROEN, TOYOTA, FORD cars.
USE

Reduced environmental impact: Fuel savings of 3.33% as measured by the official M111 FE test and savings above 4.2% as measured during the NEDC cycle compared with a 5W-40 grade oil in compliance with the ACEA A3/B4-08 test, the official test used for measuring CO2 emissions. It guarantees compliance with all the levels of performance claimed by PEUGEOT and CITROËN in relation to environmental standards.
Protection for pollution-control systems: This lubricant also optimises the way in which three-way catalytic converters and particulate filters operate, preventing them from getting clogged up with soot or sludge deposits. This reduces particulate emissions, NOx, HC and CO in particular.
Engine protection and cleanliness: This oil offers the best possible protection in its category against wear and clogging as soon as the engine is started up.
Easier cold starts: The 0W-30 grade, together with special additives, makes cold engine starts easier, even at very low temperatures (validation tests carried out down to -40°C)
Oil change intervals: TOTAL QUARTZ INEO FIRST 0W30 retains all of its properties, in accordance with the service plans recommended by PEUGEOT and CITROËN.

SPECIFICATIONS

International standards
 

ACEA
ACEA C1 & C2 2010

Manufacturers
 

PSA PEUGEOT CITROEN
B71 2312

FORD
WSS-M2C-934-B

Fiat
9.55535.GS1

 
CHARACTERISTICS

TOTAL Quartz INEO First 0W30
Units of measurement
SAE 0W30

Bulk density at 15°C
kg/m3
843

Viscosity at 40°C
mm2/s
50.18

Viscosity at 100°C
mm2/s
9.8

Viscosity index
–
187

Tidal temperature in Cleveland
°C
234

Stagnation temperature
°C
-48